Email:sales@chrome-moly-pipe.com
Need help? Contact Us! +86 13733279413
Name: | API 5L X56 Pipes |
Specification: | API 5L |
Size: | 1/4" to 120" |
Rating: | SCH10 To SCHXXS |
Steel Grade: | API 5L X42, X46, X52, X56, X60, X65, X70 |
MOQ: | 100 KGS |
Packing: | Standard seawory/airworthy packing |
End: | Plain ends or bevelled ends |
Delivery term: | FOB, CIF, CNF, EXW |
Payment term: | TT or L/C at sight |
Loading Port: | XINGANG |
Deliver mode: | By sea, By air, By land |
Hebei Zhongji carry a large inventory of new,API 5L seamless and welded line pipes for clients in the oil and gas industry. We offer a variety of industry-standard coatings such as Fusion Bonded Epoxy and TGF-3, as well as customer- and application-specific options to meet your requirements.
With sizes ranging from 1/2” OD to 30”OD, wecan meet the requirement of any midstream project, well hook up, or other transmission needs you may have. Our inventory ranges from API 5L Grade B all the way up to API 5L Grade X70. We offer scheduled options, including schedule40, schedule XSand schedule 80 as well as non-scheduled sizes.
: 1/2″ – 36″ O.D.
: API 5L B, X42, X46, X52, X56, X60, X65, X70
: Light Wall– Extra Heavy,SCH10 through SCH XXS
Chemical Composition of API 5L X56 PSL 1 |
|||||||
Mass fraction, based upon heat and product analysis a |
|||||||
Seamless Pipe |
|||||||
C |
Mn |
P |
S |
V |
Nb |
Ti |
|
maxb |
max.b |
min. |
max. |
max. |
max. |
max. |
max. |
0.28 |
1.40 |
- |
0.030 |
0.030 |
d |
d |
d |
Welded Pipe |
|||||||
0.26 |
1.40 |
- |
0.030 |
0.030 |
d |
d |
d |
0.50% maximum for copper, 0.50% maximum fornickel, 0.50% maximum for chromium, and 0.15% maximum for molybdenum.
For each reduction of 0.01% below thespecified maximum concetration for carbon, an increase of 0.05%
Unless otherwise agreed, the sum of the niobiumand vanadium contents shall be ≤0.06%.
The sum of the niobium ,vanadium andtitanium concentratons shall be =0.06%.
Mechanical Requirements |
||
|
||
Y.S |
T.S |
ELONGATION |
Mpa(psi) |
Mpa(psi) |
|
min |
min |
min |
390(56 600) |
490(71 100) |
f |
Chemical Composition of API 5L X56 PSL 2 |
|||||||||||
|
|||||||||||
Mass fraction, based upon heat and product analysis % maximum |
Carbon Equivalent A |
||||||||||
% Maximum |
|||||||||||
Cb |
Si |
Mnb |
P |
S |
V |
Nb |
Ti |
Other |
CEIIW |
CEPcm |
|
Seamless & Welded Pipes |
|||||||||||
X56N |
0.24 |
0.4 |
1.4 |
0.025 |
0.015 |
0.10f |
0.05 |
0.04 |
e |
0.43 |
0.25 |
X56Q |
0.18 |
0.45 |
1.5 |
0.025 |
0.015 |
0.07 |
0.05 |
0.04 |
e |
0.43 |
0.25 |
Welded Pipe |
|||||||||||
X52M |
0.22 |
0.45 |
1.4 |
0.025 |
0.015 |
d |
d |
d |
e |
0.43 |
0.25 |
Unless otherwise agreed, the sum of thniobium & vanadum concentrations shall be = 0.06%.
Unless otherwise agreed, 0.50% maximum for copper,0.30% maximum for nickel, 0.30% maximum for chromium, & 0.15% maximum formolybdenum.
Mechanical Requirements |
||
|
||
Y.S |
T.S |
Elongation |
Mpa(psi) |
Mpa(psi) |
|
min |
min |
min |
390(56 600) |
545(79 000) |
f |
The specified minimum elongation shall beas determined using the following equation:
API 5L X 56 PSL 1 / 2 Usage
American Petroleum Institute standard 5L.API pipes & API 5L X52 PSL 1 / 2 are exclusively used for transmission ofgas and petroleum products.
API 5L X52 PSL 1 / 2 Specification
API 5L X56 |
(PSL1) |
(PSL2) |
Minimum Yield Strength: |
56,600 psi |
56,600 psi |
Maximum Yield Strength: |
None |
79,000 psi |
Minimum Tensile Strength: |
71,100 psi |
71,100 psi |
Maximum Tensile Strength: |
None |
110,200 psi |
|
Notes: This is a standard line pipe gradespecified in API (American Petroleum Institute) specification 5L.
Click here to request a quote for API 5L X56 Line pipes.