API 5L X46 Line Pipes

Hebei Zhongji Is A Premier Supplier For Your API 5L X46 Line Pipes Needs.

Hebei Zhongji carry a large inventory of new, API 5L seamless and welded line pipes for clients in the oil and gas industry. We offer a variety of industry-standard coatings such as Fusion Bonded Epoxy and TGF-3, as well as customer- and application-specific options to meet your requirements.

 

With sizes ranging from 1/2” OD to 30”OD,we can meet the requirement of any midstream project, well hook up, or othertransmission needs you may have. Our inventory ranges from API 5L Grade B all theway up to API 5L Grade X70. We offer scheduled options, including schedule40,schedule XS and schedule 80 as well as non-scheduled sizes.

API 5L X46 Line Pipe Sizes

: 1/2″ – 36″ O.D.

API 5L X46 Line Pipe Dimensions

API 5L X46 Line Pipe Weight

API 5L X46 Line Pipe Pressure Rating

Line Pipe Grades

:  API 5L B, X42, X46, X52, X56, X60, X65, X70

API 5L X42 Line Pipe Wall Thicknesses

: Light Wall – Extra Heavy, SCH10 through SCH XXS  

API 5L X 46 PSL 1 Line Pipe Chemical Composition        

Chemical Composition of API 5L X46 PSL 1
Mass fraction, based upon heat and product analysis a
Seamless Pipe
C	Mn	P	S	V	Nb	Ti
maxb	max.b	max.	max.	max.	max.	max.
0.28	1.40	0.030	0.030	d	d	d
Welded Pipe
0.26	1.40	0.030	0.030	d	d	d

        

                 

0.50% maximum for copper, 0.50% maximum fornickel, 0.50% maximum for chromium, and 0.15% maximum for molybdenum.

For each reduction of 0.01% below thespecified maximum concetration for carbon, an increase of 0.05% above thespecified maximum concentration for manganese is permissible, up to a maximumof 1.65%

unless otherwise agreed, the sum of theniobium and vanadium contents shall be ≤0.06%.

The sum of the niobium ,vanadium andtitanium concentratons shall be ≤0.06%.

Unless otheriwse agreed.

Unless otherwise agreed, the sum ofniobium, vanadium and titanium concentrations shall be ≤ 0.15%

API 5L X46 PSL1 Line Pipe Mechanical Properties 

Mechanical Requirements
Y.S	T.S	Elongation
Mpa(psi)	Mpa(psi)
min	min	min
320 (46 400)	435 (63 100)	28%

API 5L X46 PSL 2 Line Pipe Chemical Composition

Chemical Composition of API 5L X46 PSL 2
Mass fraction, based upon heat and product analysis % maximum										Carbon Equivalent A
										% Maximum
Cb		Si	Mnb	P	S	V	Nb	Ti	Other	CEIIW	CEPcm
Seamless & Welded Pipes
X46N	0.24	0.4	1.2	0.025	0.015	0.07	0.05	0.04	e	0.43	0.25
X46Q	0.18	0.45	1.4	0.025	0.015	0.05	0.05	0.04	e	0.43	0.25
Welded Pipe
X42M	0.22	0.45	1.3	0.025	0.015	0.05	0.05	0.04	e	0.43	0.25

         

       

Unless otherwise agreed, the sum of thniobium & vanadum concentrations shall be = 0.06%.

Unless otherwise agreed, 0.50% maximum forcopper, 0.30% maximum for nickel, 0.30% maximum for chromium, & 0.15%maximum for molybdenum.

API 5L X46 PSL2 Line Pipe Mechanical Properties 

Mechanical Requirements
Y.S	T.S	ELONGATION
Mpa(psi)	Mpa(psi)
min	min	min
320 (46 400)	435 (63 100)	f

          

                 

        The specified minimum elongation shall beas determined using the following equation:    

                 

        API 5L X46 PSL 1 / 2 Usage      

        American Petroleum Institute standard 5L.API pipes & API 5L X46 PSL 1 / 2 are exclusively used for transmission of gasand petroleum products.       

                 

 

API 5L X46	(PSL1)	(PSL2)
Minimum Yield Strength:	46,400 psi	46,400 psi
Maximum Yield Strength:	None	76,100 psi
Minimum Tensile Strength:	63,100 psi	63,100 psi
Maximum Tensile Strength:	None	110,200 psi

 

Click here to request a quote for API 5L X46 Line Pipes.